THE ROMAN ROD
Roman Rod and Physical
Frequently Asked Questions
People interested in the Roman Rod asked many questions about its principle of work and its construction.
We asked the author of the book 'Secrets of Physical Radiesthesia' to answer the frequently asked questions.
What is the difference between the mantal and Physical Radiesthesia?
Mantal Radiesthesia depends entirely on your mental (extrasensory) abilities.
It means that the pure mentalist does not need rods, pendulum, etc. For him/her it is enough to concentrate on the radiesthesic task and the decision is formed in their brain.
Mentalists usually close their eyes and meditate to get to their aim.
Physical Radiesthesia is based on the law of universal gravitation (gravity). In the later (from the Renaissance onwards) formulated theories is discussed a specific wave that is emitted by every single item (or every substance) in the Universe. This wave is taken with a fork, rods, pendulum and other Radiesthesy antennas.
If so a pure physicalist should not rely on his/her mental abilities. He/she should fully abstract from all the available information about the task and he/she should try his best the antenna reaction not to be mentally initiated /biophysically/.
The main purpose is a pure physical interaction to be achieved and repetitiveness of the results.
Almost all modern radiesthesists are neither pure mantalist nor pure physicalist. They perform a mixed radiesthesia, in which a synergetics between the mantal and the physical way is desired.
The result is some kind of a biophysical reaction, strongly dependent on the extraordinary sensitivity of the operator. The repetitiveness in the results is insufficient, and getting to establishment is subjective...
Almost every popular radiesthesists has their personal theory, methodology and antennas.
What is the main principle of work of the Physical Radiesthesia?
The physical Radiesthesia is based on the gravity interaction and the gravity resonance. The reaction is purely physical. The most important things for the success of the research are the gravity conditions, the construction of the antennas /resonators and exciters/ and the balance of the setting.
What is the Gravity Resonance?
In the main idea of the gravity resonance are placed the Energy and the two fundamental forces (Absolute Gravity and Absolute Entropy).
Each quality detachment in the Universe is energy derivative and therefore is subjected to Gravity-Entropy pulses. It starts with energy quanta and gets to the Universe (as a whole) every single thing in the real world is under G-E pulses determined by fundamental forces.
In specific G-E conditions, the gravitational attraction between the similar qualitative detachments (from same chemical elements) increases significantly. Under these conditions, the inertial mass is not equal to the gravity mass. This makes it possible to register the presence of a gravitational resonance.
In the Universe there is no dark matter and dark energy, but has phenomenon - the gravitational resonance.
Energetic theory is still explored. The publications are:
Do we need powerful bio energy currents and ESP to achieve results in Physical Radiesthesia?
In the Passive Physical Radiesthesia (antennas with no exciter, just with a resonator) you may need powerful bio energy currents and ESP.
In Active Physical Radiesthesia you do not rely on any extraordinary abilities of the operator. The excitation of the resonator and the achieving of gravitational resonance depend on the exciter.
Is it possible for everyone to work with Roman Rod (RR)?
Roman Rod is a device with an active radiesthetic antenna. Its main idea, even being a very simple model it is a real gravitational locator and its reaction is based entirely on the gravitational interaction and gravity resonance. The excitation of the resonator is achieved by radiation initiated by radioactive elements contained in the clay. The stronger the radiation (the clay is more radioactive), the more powerful is the gravitational resonance, i.e. the device’s reaction is stronger and more accurate.
Balance of the system is crucial to the response of the antenna.
How long does it take to balance RR?
To balance the whole system you need a complex of multiple movements. To achieve an evenly balanced sweeping motion requires multiple dry run training.
This learning process can be compared to how you learn to ride a bike. It takes diligence, perseverance and in the process of improving your own motion abilities.
The time to achieve an optimum balance is different for very person. People with better hand-eye coordination only need several months of training to be ready for field work.
Can you work with RR in days not around full Moon?
To achieve gravitational resonance appropriate gravitational conditions are required. The latter are directly dependent on the large gravitational masses. The Earth, the Sun, the Moon and the nearby planets affect the gravity conditions and the achieving of a distinct gravitational resonance.
The days around full Moon are reckoned suitable for radiesthesy research since ancient times. These time windows, however, are only a particular case, i.e., they are only a part of the full time windows in which the gravitational conditions are suitable for gravity location.
We have special profile software, thus we can calculate the time windows for gravitational resonance for every single place on Earth.
How can you achieve more precise location with the RR?
To achieve the most accurate location you need to get max powerful gravitational resonance.
To do so, you need to construct the device well (antenna, bearings, resonator and exciter). The operator needs to perfectly master the balance and to conduct the location in optimal gravitational conditions.
The best conditions to achieve gravitational resonance are when full Moon is in the middle of the time windows (10 days).
Because everything is subjected to gravity and gravitational interaction, you should consider the effects of sudden gravitational anomalies (highly folded topography, large gravitational masses, cavities, etc.).
Do we have to use geophysical systems to achieve precise location?
Because the device only interacts with the horizontal component of the gravity (antenna horizon) close location of the object is not possible.
When you get closer to the object, that reduces the horizontal component and it increases the influence of Coriolis forces. Doing so leads to large deviations that may reach 90 degrees.
Distant location and deviation of the antenna require intersection of the zone.
The latter should be explored with conventional geophysical systems. They allow you to get exact location of the object.
Can RR antenna be made of different from glass or fibre glass material?
Yes, the antenna of the device can be made of material different from glass. We recommend you to use materials with low atomic weight such as PVC and other plastics.
It is unacceptable in the construction of the antenna to be present any metal (elements with high atomic weight) but the resonator.
What should be the distance between the exciter and the resonator?
A very important condition for the effective excitation is the direct visibility between the exciter and resonator. It is even better if they are in contact, but in this case it is very important the line of contact to be exactly on the axis of rotation of the antenna. We recommend the distance between the resonator and the exciter when axel related to be only a few millimeters, so that the distance between them does not exceed 10 mm.
What should be the distance between the antenna and the bearing?
The specified distance of the antenna and the bearing does not have to be precisely fixed.
Still the distance should not be more than 2 cm for a stable construction.
How to make on our own resonators?
Resonators must be made of chemically pure metal. It is a good idea the grade to be 999.
The shape of the resonator must be cylindrical.
You can also use wire with small section.
In this case, you should arrange tightly one next to the other many similar elements in the plastic cylinder.
You can also roll a foil from the relevant metal over an adequate plastic core or just to use a metal tube.
In this case, in a plastic cylinder put in order (close together) identical elements.
It may also be use the respective metal foil on a suitable plastic core or tube of the appropriate metal.
Eventually you can use metal plates (investment gold, platinum, etc.).
The plates should be installed on a suitable plastic plate/in one plain/tightly one next to the other.
When installing a flat resonator in the antenna you should be careful the plain of the plates to be perpendicular of the axel of rotation on the device /parallel to the antenna horizontal/.
You can make your own resonators from all the metals with atomic weigh higher than the copper weight.
Can you reduce the weight of the resonators?
Generally speaking you can, but the device reaction and the distance of the location will decrease.
You can weight off double the gram weight of resonators /as specified in the book/ if you use the special exciter RRGLE.
When excited with RRGLE, even when the resonator weight is weighed off double, the device reaction remains stronger than the traditional excitation with radioactive clay and standard /two times heavier/ resonators.
Where do we find radioactive clay?
In general, most of the clays have high radioactivity, but for efficient excitation radioactive clay is required.
Deposits of such clays are in the areas where there are deposits of radioactive minerals, radioactive water, etc.
In the tailing repository of metal production companies radioactive clay can also be precipitated.
In the tailings repository on the territory to the former Rare Metals Company there is radioactive clay with the highest radioactive degree.
Are there safe exciters?
Yes, there are. We had designed a special, absolutely safe exciter RRGLE with a resource lasting longer than 10 years.
Those, who are determined to work with gravitational location, can contact us on
Could you achieve a gravitational resonance and gravity location with pendulum, fork and an L shaped rod?
Generally speaking you can, but only if the devices are made of exactly the same metal that you want to find. I.e. a golden rod can only spot gold; silver - silver only, etc.
You cannot achieve gravitational resonance if your rod is from copper and you want to find gold. Copper rod works only for copper. The radiestisist who may find anything with copper rods... what he really practices is mixed radiesthesia. The latter is not based on gravitational resonance and has mantal character.
It is important to bear in mind that the work is done with passive antennas. I.e. excitation of the device uses the energy currents and the ESP of the operator. This results in very poor reaction and strong subjective factor.
The fork is the most difficult to balance. The pendulum is difficult to balance and Coriolis forces have the strongest influence on it. L shaped rod is actually the primary structure (primitive) of the Roman Rod.
Anyone can easily make an L shaped rod from thick golden, silver or other metal wire. I.e. for every metal you want to find you need to have a relevant rod, made of the relevant metal.
The research must be conducted according to the methodology of the Roman Rod (with only one rod, not a pair) in the timing windows for optimum gravitational resonance, and the operator must have good extraordinary abilities to be able to excite the device.
Can the RR be affected by a residual radiation, which was formed in the area by an object that is no longer there?
No, it cannot. Roman Rod cannot detect a missing object, i.e. if it is not physically present – there is no reaction.
If you have a location, there is an object in the area.
Can ghost objects be located when working with Roman Rod?
No, there are no such problems. When locating with Roman Rod ghost objects cannot be observed. You can only locate the presence of real objects.
If there is a deviation from the object it is a consequence of reduced horizontal component of the interaction, of the influence of Coriolis forces, or the influence of large gravitational anomalies in the field, or the influence of gravitational resonance conditions (time windows) and other gravitational influences.
The deviation is usually within ten meters and has nothing to do with the ghost objects seen in mental and mixed Radiesthesia.
ALL RIGHTS RESERVED © SFERAGROUP ©